Arkon SM283 Leaflet

 SM283 - CM983  |  Lighter Socket Mobile Phone or PDA Mount

Consumer Hotline: 
(USA)    (800) 841-0884
(INT'L)   (626) 254-9005
Mon-Fri. 9am-5pm, PST

Arcadia, CA 91006 USA

Designed in USA | Made in Taiwan

© Copyright 2008 Arkon Resources, Inc.

Do not install Arkon products over an air bag cover or within the air 
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or 
air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to 
your car, your device, or yourself due to the installation or use of 
this mounting solution.

SM020

CM083

CM083

CM090

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Insert the lighter socket plug 

(A) completely into the vehicle's 

12V / lighter socket.

Rotate the adjustment tightening ring 

(B) until the inserted 

end of the pedestal expands and is held securely in the 12V / 
lighter socket. 

Using both hands, carefully bend the pedestal to desired angle.

Adjust the angle of the pedestal arm by tightening the wing 
nut 

(C) to the desired placement angle.

Attach your cradle or device to the pedestal by inserting the 
single T-tab 

(D) into the T-slot (E). Readjust the angle and 

rotation of the head by tightening the wing nut 

(C). 

Step 1.

Step 2.

Step 3.

If necessary, adjust the support legs 

(G) by sliding them laterally.  

These provide support for your device.

Place device on the support legs 

(G) and squeeze the side grip 

arms 

(F) until they fit securely to the device.

Push the release button 

(H) in order to release the device from 

the cradle.  

(Sold Separately)

(Sold Separately)

(Sold Separately)