Alsoft DiskWarrior - 2.0 Instruction Manual

 

DiskWarrior is not copy protected, so the Finder can be used to create a backup of the 
DiskWarrior package that you received.

 

If you received DiskWarrior electronically, then you have already registered your 
purchase with us. If you received DiskWarrior on a CD-ROM, then you should perform 
the following steps:

1) Note your DiskWarrior serial number on the CD packaging or the CD itself.
2) Completely fill out the product registration card and mail it to Alsoft. Be sure to 
include the serial number. You can also register your product on the Web at <http://
www.Alsoft.com/registrationform.html>.

 

Your DiskWarrior serial number is required for proper registration of your purchase 

so that you may receive Technical Support, updates, and future product special offers.

 

It is recommended that you put the folder containing the DiskWarrior application and the other 
files on another hard disk, a floppy disk, or a third-party removable media disk so that you have 
a copy of DiskWarrior available even if you cannot access your startup disk. You can also put this 
folder on a RAM disk; refer to 

 

Record the serial number you received in the e-mail that confirmed your purchase of DiskWar-
rior. You will need this serial number the first time you run DiskWarrior.

 

DiskWarrior can be run directly from the DiskWarrior CD, and your Mac OS computer can be 
started from this CD-ROM. This will allow you to rebuild the directories on any HFS or HFS Plus 
disks that DiskWarrior can rebuild as described in this chapter, including your normal startup 
disk.