Alsoft DiskWarrior - 2.0 Instruction Manual
Running DiskWarrior
Chapter 2: Using DiskWarrior
37
again in case the error is intermittent and the copy operation can be performed for those files.
This will minimize the number of items that the recovery service will need to recover for you.
This will minimize the number of items that the recovery service will need to recover for you.
DiskWarrior Shortcuts - AppleScripting and Drag and Drop
Now that you fully understand the steps required to rebuild your disks with DiskWarrior, there
are two other methods you can use to rebuild your disks with DiskWarrior. However, you should
be aware of the following two caveats:
are two other methods you can use to rebuild your disks with DiskWarrior. However, you should
be aware of the following two caveats:
1.
Make sure that you have entered in your registration information as described in step 3
above.
above.
2.
Any error messages will halt the operation of DiskWarrior while it waits for your response.
If either of these occur while using DiskWarrior as described below, no further progress will be
made on any analysis or repair that you expected DiskWarrior to perform.
made on any analysis or repair that you expected DiskWarrior to perform.
AppleScripts
Drag and Drop
By simply dragging a disk in the Finder onto the DiskWarrior application (or an alias
of it), DiskWarrior will begin rebuilding the disk’s directory immediately. You can also
drag a group of disks onto the DiskWarrior application and DiskWarrior will rebuild
them all sequentially.
of it), DiskWarrior will begin rebuilding the disk’s directory immediately. You can also
drag a group of disks onto the DiskWarrior application and DiskWarrior will rebuild
them all sequentially.