Avalon Acoustics RT423 User Manual
AVALON RF, INC.
Page 6
RT423 User’s Guide & Operating Manual
2.5
Mechanical
2.5.1 Mounting.
Mounting can be done in one of the following methods:
a) Clamping.
Clamping (or hard mounting) is the recommended method and the
only method of mounting in all fixed installations or when operating
from >10V.
only method of mounting in all fixed installations or when operating
from >10V.
Clamping is also the preferred method of mounting in mobile
installations where most electrical interfaces are used.
installations where most electrical interfaces are used.
b) Clip on.
Avalon RF offers a clip on kit. This method is acceptable when
operating from a 9V battery and only one or two interfaces are in
use.
operating from a 9V battery and only one or two interfaces are in
use.
c) Velcro
®
to a flat surface.
The RT423 may be mounted using Velcro
®
if it is required to be
detached frequently. However, in this case it must be operated
from a 9V battery.
from a 9V battery.