Alfa AWAP08O-11gHP User Manual

 

57

 

1.  To use the DHCP server inside the device, please make sure there is no other 

DHCP server existed in the same network as the device. 

2.  Enable the DHCP Server option and assign the client range of IP addresses as 

following page. 

 

3.  When the DHCP server is enabled and also the device router mode is enabled 

then the default gateway for all the DHCP client hosts will set to the IP address 

of device. 

Start a SSH(Secure Shell) client session to login the device 

The SSH server daemon inside device uses well-known TCP port 22. 

User must use SSH client utility such like Putty to login the device. The 

default password for user “root” is “qwert”, once user login the device 

then can change the password by CLI command. 

Execute CLI program 

This program won’t execute automatically when user login the device. 

User must manually execute it by typing the case-sensitive command 

“cli”. Please note that any modified settings won’t save permanently 

until user “Apply Changes to Flash” or reboot it. The new settings 

modified by CLI will take effect after rebooting the device. 

Menu Tree List