Alfa AWAP08O-11gHP User Manual

 

8

There are two interfaces to configure the device, one is web-browser 

interface, and the other is Secure Shell CLI interface. To access the 

configuration interfaces, make sure you are using a computer connected to 

the same network as the device. The default IP address of the device is 

192.168.2.254, and the subnet-mask is 255.255.255.0. 

The device has three operation modes (Router/Bridge/WISP). In bridge 

mode, you can access the device by both WLAN (Wireless Local Area 

Network) and wired LAN. And in router/WISP modes, the device can be 

accessed by both WLAN and WAN. The default IP addresses for the device 

are 192.168.2.254(for LAN), 172.1.1.1(for WAN), so you need to make sure 

the IP address of your PC is in the same subnet as the device, such as 

192.168.2.X(for LAN), 172.1.1.X(for WAN). 

Please note that the DHCP server inside the device is default to up and 

running. Do not have multiple DHCP servers in your subnet, otherwise it will 

cause abnormal situation. 

Inside the CD, we provide the device auto-discovery tool, the tool can detect 

the device even your PC is not in the same subnet as the device in case the 

IP address of device is changed and forgot by user. The tool only can 

discover the device in your local area network. 

ZWA-G192-OD can act as the following roles, and it supports WDS 

(Wireless Distribution System) function. 
z Access 

Point 

 

z  WDS (Wireless Repeater) 
z Bridge/Router 
z WISP 
z AP 

Client