Advent UBTSW2 User Manual

2

The Bluetooth kit will automatically turn on when the vehicle s key is turned to the accessory position and will 

remain on until the vehicle s accessory power is turned off. After turning on, the Bluetooth kit will automatically 

search for phones it was paired with previously Since multiple phones can be paired to the system the

connecting priority will be the last phone paired followed by the phone used most frequently with the system

and then the phone used second most frequently If the Bluetooth kit has not been paired to a phone pairing

will automatically activate.

When connected to the Bluetooth kit you may use your phone as normal to dial numbers or search your
contacts list or you can use Voice Dialing

To activate voice dialing press the ANSWER key on the Bluetooth keypad The system will prompt you for a 
command. Clearly speak your command (for example,  call Shaun The system will confirm the command and
attempt to  call Shaun

To end a call press and hold the END key

During an incoming call, the vehicle's radio will be muted / turned off and the call will ring through the vehicle's 

speakers. To answer an incoming call, press the ANSWER key.

To ignore an incoming call press and hold the END key for 2 seconds.

To redial the last number, press and hold the ANSWER key for 2 seconds.

During a call, you can adjust the volume up/down using the ANSWER key or END key. Each press raises or 

lowers the volume by 1 level. When the minimum or maximum volume is reached, the system will beep twice.

To transfer a call between Bluetooth hands free and normal phone operation, press and hold the ANSWER key

on the Bluetooth keypad for 2 seconds.

To activate phone pairing, press and hold the END key for 10 seconds Next activate pairing on the phone

refer to the phone s owners manual). When a pin code is requested during pairing, enter  1234 using the

phone