HP 160 G6 490455-421 User Manual

Parallel

None

Network RJ-45(Ethernet)

2 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP ProLiant
Lights-Out 100i Remote Management)

Serial

1

Pointing Device (Mouse)

0 (via USB only)

Graphics

1

Keyboard

0 (via USB only)

USB

5 (two front, one internal, two rear)

NOTE: In order to connect a USB device internally, the internal USB Cable G6
Kit must be used (536769-B21)

ACPI V2.0 Compliant

PCI 2.2 Compliant

PXE Support
WOL Support

Microsoft® Logo certifications

IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

One 6' Highline (IEC-IEC) power cord ships standard

NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow
connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to
PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user
wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord must be
ordered separately.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: 

500 Watts, auto-switching, high efficiency, PFC (Power Factor Correcting)

NOTE: Factory upgradeable to high-efficiency hot plug common slot or redundant hot-plug power supply.
NOTE: It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power
supply for your needs. HP Power Advisor can be accessed at: 

.

6 system fans ship standard; Non-hot plug, N+1 Redundant Standard

NOTE: Fan redundancy is not available when 130W processors are installed.

Standard Features

DA - 13247   Worldwide — Version 59 — September 24, 2012

Page  5