HP 160 G6 490455-421 User Manual

Product codes
490455-421
Page of 55
System Unit
Dimensions (H x W x D)
(with bezel)
1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
Weight
(approximate)
Maximum
(all hard drives, power
supplies, and processors
installed)
34.00 lb (16.78 kg)
Minimum
(one hard drive, power
supply, and processor
installed)
28.00 lb (12.7 kg)
Input Requirements
(per power supply)
Rated Line Voltage
90 to 132 VAC
180 to 264 VAC
Rated Input Current
5. 8 Amps (at 100 VAC) to 2.9 Amps (at 200 VAC)
Rated Input Frequency
47 to 63 Hz
BTU Rating
Rated Input Power
570W (at 100 VAC)
565W (at 200 VAC)
Maximum
500W
1940 BTU / hr (at 100
VAC)
1920 BTU/hr (at 200
VAC)
460W
1773 BTU / hr (at 120
VAC)
1715 (at 240 VAC)
750W
2892 BTU / hr (at 120
VAC)
2797 (at 240 VAC)
Power Specifications
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
Or
- Click on the system of interest. Example: DL160 G6
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State Power 500 Watts (at 100 VAC),
500 Watts (at 200 VAC)
Maximum Peak Power
(See Power Specifications
Tables)
500Watts (at 100 VAC),
500 Watts (at 200 VAC)
System Inlet
Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Technical Specifications
DA - 13247   Worldwide — Version 59 — September 24, 2012
Page  52