Motorola 53725 Leaflet
Important Safety Information
Please observe the following to ensure reliable operation of the PTT Pod:
1. Read this manual thoroughly and observe the operating instructions and
Please observe the following to ensure reliable operation of the PTT Pod:
1. Read this manual thoroughly and observe the operating instructions and
information provided.
2. Do not expose the equipment to extreme temperatures or high relative
humidity and protect it from direct sunlight and dusty conditions.
3. Clean the equipment with a soft, damp cloth. Do not use any solvents or
aggressive cleaning agents.
4. Only connect approved accessories.
5. Only use the power plug supplied.
6. Never open the unit. Opening the unit voids any claims under the terms
5. Only use the power plug supplied.
6. Never open the unit. Opening the unit voids any claims under the terms
of the warranty and exposes the person to the risk of an electric shock.
7. Repairs to defective units should only be carried out by
Giant International Ltd.
8. Batteries built into device are NOT user replaceable. Discard entire device
according to local regulations.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
PTT Pod - 1693 Product At-A-Glance
Turning on/off the PTT Pod - 1693
To turn on/off your PTT Pod, press and hold the power on/off button
To turn on/off your PTT Pod, press and hold the power on/off button
for
about 2 seconds.
Charging the PTT Pod - 1693
The PTT Pod is equipped with a rechargeable battery that must be fully
charged before you use it for the first time.
1. Connect the power adapter to the unit. Plug the AC adapter into the
The PTT Pod is equipped with a rechargeable battery that must be fully
charged before you use it for the first time.
1. Connect the power adapter to the unit. Plug the AC adapter into the
electrical outlet.
2. The LED indicator will be red while charging. If the LED indicator is not
red, check the connection.
3. When the PTT Pod is fully charged, the red LED indicator will turn blue.
4. Remove the AC adapter from the PTT Pod.
4. Remove the AC adapter from the PTT Pod.
Note: If charging while the PTT Pod is on, the PTT Pod will turn off
automatically.
automatically.
GIANT TELECOM LIMITED
Customer : GI
Model Number : 1693
Description : Line Drawing for User Manual
Version : R01
Date : Jun 25, 2013
1
2
2
3
5
4
1. Power on/off button
2. Push-to-Talk (PTT) button
3. BLUETOOTH
2. Push-to-Talk (PTT) button
3. BLUETOOTH
®
LED
indicator
4. Headset Jack
5. Charging Port
5. Charging Port
KEM-ML36802
Talkabout
®
Wireless BLUETOOTH
®
PTT Pod - 1693
User’s Guide
Compatible with MU350R Series FRS/GMRS
BLUETOOTH
®
2-way Radio.
For further information
You may call Motorola Solutions, Inc. as follows:
USA: 1-800-638-5119, e-mail us at support@giantintl.com or
visit us on the Internet at motorolasolutions.com/talkabout.
GIANT TELECOM LIMITED
Date : Jul 16, 2013
Description : MU350 + 1693 + BT headset
GIANT TELECOM LIMITED
Date : Jul 17, 2013
Description : MU350 + 1884 + 56320
Enabling the MU350 Series Radio’s BLUETOOTH
®
Functionality
1. With the radio on, briefly press
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
until
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
appears on the LCD. The
current setting On/Off will flash.
2. Press either the
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
or the
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
button to select On.
3. Press PTT to save settings.
4. With the MU350 Series Radio BLUETOOTH
4. With the MU350 Series Radio BLUETOOTH
®
enabled, press and hold
the
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH
®
LED indicator on the radio will flash blue.
5. Successful pairing will be indicated by a tone and brief flashing of the
BLUETOOTH
®
LED indicator to confirm entry to connected mode.
Note: The PTT Pod can be used in various use case scenarios with
various compatible products. See reference table on back page and
below description of the various use cases. The MU350 Series radio
can be paired with 2 BLUETOOTH
various compatible products. See reference table on back page and
below description of the various use cases. The MU350 Series radio
can be paired with 2 BLUETOOTH
®
devices.
(A) Pairing the PTT Pod - 1693 with the MU350 Series Radio
1. Enable the MU350 Series Radio’s Bluetooth functionality (see above)
2. Ensure the PTT Pod is off.
3. Press and hold the power on/off
1. Enable the MU350 Series Radio’s Bluetooth functionality (see above)
2. Ensure the PTT Pod is off.
3. Press and hold the power on/off
button until the PTT Pod LED
indicator light flashes blue and red alternatively.
4. With the MU350 Series Radio BLUETOOTH
®
enabled, press and hold
the
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH
®
LED indicator on the radio will flash blue.
5. Successful pairing will be indicated by a tone and brief flashing of the
BLUETOOTH
®
LED indicator to confirm entry to connected mode.
6. If pairing was successful, the PTT Pod LED indicator will flash blue at 5
second intervals.
7. If pairing fails, turn the PTT Pod and the MU350 Series Radio off and
repeat the above process.
Reconnecting the PTT Pod - 1693 to the FRS/GMRS radio
After initially pairing and connecting your FRS/GMRS radio and PTT Pod,
when you turn on the PTT Pod, it will automatically reconnect with the
paired FRS/GMRS radio; however, you can press the power on/off button
After initially pairing and connecting your FRS/GMRS radio and PTT Pod,
when you turn on the PTT Pod, it will automatically reconnect with the
paired FRS/GMRS radio; however, you can press the power on/off button
once to connect rapidly.
(B) Pairing your Bluetooth Headset to the MU350 Series Radio and
the PTT Pod - 1693
the PTT Pod - 1693
2. Press the PTT Pod button and speak into the headset’s microphone to
transmit. Release the PTT Pod to receive transmission via the headset.
(D) Using Motorola Earpiece - 53728 (no Microphone) connected to
the 1693 POD. The connected 1693 POD is paired to the MU350
Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
the 1693 POD. The connected 1693 POD is paired to the MU350
Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
PTT Pod, plug your earpiece connector into the headset connector port
located on the PTT Pod.
located on the PTT Pod.
2. Press the PTT Pod button and speak into the MU350 Series radio’s
microphone to transmit. Release the PTT Pod to receive transmission via
the earpiece.
the earpiece.
(E) Using Motorola Headsets with Microphone - 53725 or 56320
connected to the MU350 Series Radio’s accessory jack. The PTT POD is
paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
connected to the MU350 Series Radio’s accessory jack. The PTT POD is
paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
PTT Pod, plug your headset connector into the headset connector port
located on the MU350 Series Radio.
located on the MU350 Series Radio.
2. Press the PTT Pod button and speak into the headset’s microphone to
transmit. Release the PTT Pod to receive transmission via the headset.
(F) Using the Motorola Earpiece - 53728 (no Microphone) connected to
the MU350 Series Radio’s accessory jack. The connected PTT POD is
paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
the MU350 Series Radio’s accessory jack. The connected PTT POD is
paired with the MU350 Series Radio
1. Once you have completed pairing the MU350 Series Radio with the
PTT Pod, plug your earpiece connector into the headset connector port
located on the MU350 Series Radio.
located on the MU350 Series Radio.
2. Press the PTT Pod button and speak into the radio’s microphone to
transmit. Release the PTT Pod to receive transmission via the earpiece.
(G) Using a generic BT Headset with the MU350 Series Radio
1. Connect headset as described under “B” without following step 2.
1. Connect headset as described under “B” without following step 2.
PTT Pod LED Status under different operations mode
Status
Instructions
LED
Power on
Press and hold power on/off
button
button
button for 2 seconds
Blue flashes 4 times
Power off
Press and hold the power on/off
button
button
button 4 seconds
Red LED flashes for
1 second and then turns off
1 second and then turns off
Pairing mode
1st time pairing: Press and
hold power on/off button
hold power on/off button
for 2 seconds when powering
on. After 1st pairing: Press and
hold
on. After 1st pairing: Press and
hold
for 6 seconds when
powering on.
Red and blue LED flashes
alternately
alternately
Stand by
Ready for pairing
Blue LED flashes at a
2 second interval
2 second interval
Paired
Paired
Blue LED flashes at a
5 second interval
5 second interval
PTT
Press and hold PTT button
Steady Red LED (without
headset)
Red and blue LED remains
on (with headset)
headset)
Red and blue LED remains
on (with headset)
Release PTT
Release PTT button
Blue LED flashes at a
5 second interval
5 second interval
Charging
Connect charger
Steady red LED
Charged
After Pod is connected to
charger up to 3 hours
charger up to 3 hours
Steady blue LED. Red may
flash periodically while
maintaining full charge
flash periodically while
maintaining full charge
Low Battery
Red LED flashes for
1 second and then turns off
1 second and then turns off
Auto Power off
5 mins after connectable mode
(no pairing)
(no pairing)
LED is off
The MU350 Series Radio BLUETOOTH
®
works with any qualified BLUETOOTH
®
headsets from BLUETOOTH
®
SIG, Inc.
1. Enable the MU350 Series Radio’s
BLUETOOTH
®
Functionality (see above)
2. Pair with the PTT Pod (see “A” above)
3. Follow the BLUETOOTH
3. Follow the BLUETOOTH
®
headset
manufacturer’s instruction to enable its
BLUETOOTH
BLUETOOTH
®
function.
4. With the MU350 Series Radio
BLUETOOTH
®
enabled, press and hold
the
GIANT TELECOM LIMITED
Customer: GI
Model Number: MU350R
Description: LCD Display Graphics
& Line Drawing (Front View)
Version: R03
Date: May 07, 2013
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Emergency Alert
Flash Light LED
Speaker
Accessory Port
TX/RX LED
Indicator
Bluetooth LED Indicator
Call Tone
Microphone
Flash Light
Button
Volume
Push to Talk
(High)
Push to Talk
(Low)
Scroll
Mini-USB
Charging Port
Menu / Keypad Lock
Scan / Monitor
Scroll / Weather
Numbers for Codes
Numbers for Channel,
Call Tone
Call Tone
—Battery Meter
—Channel Power
Indicator
(see menu Options)
Indicator
(see menu Options)
—Keypad Lock
—Talk Confirmation
Tone (Roger Beep)
Tone (Roger Beep)
—Noise Filtering
—On/Off for each
—Bluetooth
feature
—Scan
—Call Tone,
Keypad Tone
Keypad Tone
—Weather Alert
—Hands-Free Use
Without
Accessories
Without
Accessories
—Hands-Free Use
With Accessories
With Accessories
—Dual Scan
—Vibrate
Line Drawing best fitting for UG
1:1 Scale
button for about three seconds to enter pairing mode. A tone will
sound and the BLUETOOTH
®
LED indicator on the radio will flash blue.
5. Successful pairing will be indicated by a tone and brief flashing of the
BLUETOOTH
®
LED indicator to confirm entry to connected mode.
6. After successful pairing, you can talk and listen via the paired
BLUETOOTH
®
headset.
(C) Using the Motorola VOX Headsets
(with Microphone) - 56320/53725
connected to PTT POD. The connected
1693 is paired with the MU350 Series
Radio
1. Once you have completed pairing the
(with Microphone) - 56320/53725
connected to PTT POD. The connected
1693 is paired with the MU350 Series
Radio
1. Once you have completed pairing the
MU350 Series Radio with the PTT Pod,
plug your headset connector into the
headset connector port located on the
PTT Pod.
plug your headset connector into the
headset connector port located on the
PTT Pod.