Motorola Automobile Accessories F5218 User Manual

This section describes the tools and equipment, planning requirements, and product 

inspections necessary for a smooth installation of the MW810 Mobile Workstation. Proper 

planning will help to ensure that the installation is completed without difficulty and that no 

damage occurs to the units or the vehicle.

Unpack your shipment and check the contents to ensure that you have received all the 

specified items.
Thoroughly inspect the equipment for shipping damage as soon as possible after delivery. 

Report any damage you find to your Motorola Solutions Customer Service representative 

immediately.
Save the packing carton and anti-static plastic bags for storage and shipping. Both the 

shipping carton and the anti-static bags protect the MW810 Mobile Workstation components 

from physical and electrostatic damage.
The following optional parts can be used to mount the MW810 Mobile Workstation:
• Display mount assembly - see “12.1“ Display” on page 14 and “8.4” Display” on page 18.
• CPU Box Mounting Trunnion for the MW810 Mobile Workstation CPU - See “CPU Box 

• 3rd Party Mounts - 

http://www.havis.com/

The following tools and service aids are required for installation:
• 3/8” nut driver 
• 1/2”, 3/8” or 7/16” wrench
• No. 2 and 4 Phillips screwdriver
• Drill with 3/16” drill bit

The MW810 Mobile Workstation is a reliable product when installed 

correctly. However, performance can be seriously impaired if it is not 

installed correctly. Thoughtful planning can make the difference.