Motorola Automobile Accessories F5218 User Manual
Installation
39
Table 3 details the pin layout of the 1000 Base-T Ethernet connection
Mic Line In Connection
The MW810 Mobile Workstation is equipped with a Audio In connector to which an external
microphone can be connected.
Audio Line Out Connection
The MW810 Mobile Workstation is equipped with an Stereo Audio Line Out connector to
which external earphone can be connected or external speaker with a built-in amplifier.
Power (PWR) Connection
The MW810 Mobile Workstation is equipped with two DC power cables and fuses, one for
the CPU Box and the other for the display. To connect power to the MW810 Mobile
Workstation units, refer to “Electrical Guidelines” on page 11.
Important Note:
The MW810 Mobile Workstation default power system is 12V. In order
to use the MW810 Mobile Workstation with 24VDC power system, the POWER SOURCE
parameter in the CPU Codeplug must be changed to 24V. To change the POWER SOURCE
parameter in the CPU Codeplug, refer to Motorola Solutions MW810 Mobile Workstation,
R2.0, Administrator Guide (P.N: 6802988C42).
Table 3
1000 Base-T Ethernet Connection - Pin Layout
Pin No.
Signal
1
DA+
2
DA-
3
DB+
4
DC+
5
DC-
6
DB-
7
DD+
8
DD-
1
2
3
4
5
IN and VREF
NC
Mic Line In
1
2
3
4
5
Line Out Left
Line Out Right
Audio Line Out