LG 1200 User Manual

Section 2: Understanding Your PCS Phone

Your PCS Phone is equipped with a Lithium Ion (LiIon) battery. 
It allows you to recharge your battery before it is fully drained. 
The battery provides approximately 

 hours of continuous 

digital talk time (

 hours in analog) or approximately 

 

hours of continuous digital standby time (

 hours in analog). 

When the battery reaches 

% of its capacity, the battery icon 

blinks. When there are approximately two minutes of talk time 
left, the phone sounds an audible alert and then powers down.

Note: Long backlight settings, searching for service, vibrate mode and 
browser use affect the battery’s talk and standby times.

Tip: Be sure to watch your phone’s battery level indicator and charge the 
battery before it runs out of power.

Your PCS Phone comes with a LiIon battery. Follow these steps 
to install it:

1. Place the battery in the opening at the back of the phone at 

a 45-degree angle with the metal contacts at the bottom, 
facing downward.

2. Gently press down on the battery until the latch snaps 

into place.

To remove your battery, follow these easy steps:

1. Make sure the power is off so that you don’t lose any stored 

numbers or messages.

2. Push up on the battery release latch on the back of 

the phone.

3. Remove the battery from the phone at a 45-degree angle.