Mobility Electronics PS6U1UHE User Manual

 

 

InVision USB-Host to Ethernet Adapter User Guide 

 
Symptom: 

ActiveSync partnership between host 

computer and your MC1000 is not correctly 
established 

Reconnect the MC1000 directly to the host computer 

and try an ActiveSync operation.  

If it fails, refer to the Symbol Integrator Guide for 

guidance with ActiveSync problems, or contact Symbol 

Technical Support. 

If ActiveSync works OK when directly connected to the 

host computer, see the remaining “possible cause” 

items. 

PS6U1UHE not configured for DHCP 

Reconfigure device to accept DHCP IP address 

Cannot find DHCP/WINS server(s) 

Ensure PS6U1UHE adapter is connected to a router, 
switch, or hub that is serviced by a DHCP and a WINS 

server. 

Missing, or improperly configured, software 

drivers  

Reset (cold boot) the MC1000 as directed in Symbol 

Integrator Guide. Reinstall and reconfigure software 

drivers in accordance with current instructions. 

Won’t automatically ActiveSync when inserted 

into the cradle 

1.  The eConnect™ software is not configured 

correctly. 

2.  The MC1000 is not correctly seated into the 

cradle. 

Network problems 

Check the LEDs on both ends of the PS6U1UHE to help 
determine if you are having network problems. A 

description of each light’s color and its meaning is 

contained in the Introduction Section.  

If you require more information on the ActiveSync process, please refer to the ActiveSync 

chapter in your Symbol Integrator Guide or visit 

ActiveSync. For help with other technical issues, contact Mobility Technical Support using 

the contact information provided at the start of this chapter.  

 10 

Mobility Electronics, Inc