Mio P350 User Manual

 

• 

 - green means 3D reception. The GPS receiver has enough satellites to 

calculate altitude. Position is generally correct (yet it can still be inaccurate due 
to different environmental factors). Mio Map is ready for navigation. 

In the top right corner of the screen you have another button that leads to a new 
screen where you can synchronize the clock of your PDA to the very accurate time 
provided by the GPS. 

 

 

Turn on the Auto Correction switch to let Mio Map frequently check and correct the 
PDA time with the GPS time. 

Below that button you will see the current values of the GPS and the PDA clocks. 
You can check here whether any correction is needed. Tap the 

 button to 

manually synchronize the time. 

Below the PDA time you have hour and minute controls to manually correct the time 
with or without a valid GPS time. It also gives you the chance to correct the time after 
synchronization if your PDA does not support time zones or daylight saving time. 

You have two black buttons in this screen. These buttons open the automatic 
(Detect) and the manual (Config.) GPS Setup screens. For information on how to set 
up the GPS connection refer to section 6.7. 

The Route Information screen has all the data and some of the functions you need 
while you navigate. Some additional functions can be found in the Route menu 
(4.6.3). Without an active route one of the buttons is inactive and route data cannot 
be displayed. 

As a reminder, you can open this screen three ways: pushing the Route Information 
hardware button (3.1.6), tapping the Info button in the Route menu (4.6.3.6), or 
tapping one of the Route Data fields on the Cockpit screen. 

 

39