BT STUDIO Studio 3500 User Manual

You need to place your BT Studio 3500 within 2 metres of the
mains power socket and telephone socket so that the cables
will reach.

Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.

Your BT Studio 3500 works by sending radio signals between
the handset and base. The strength of the signal depends on
where you site the base. Putting it as high as possible can
help to provide the best signal.

1. Plug the power adaptor and telephone cable into the back of

the base.

BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999

Do not place your BT Studio 3500 in

the bathroom or other humid areas.

The BT Studio 3500 has a range of up

to 300 metres outdoors when there

is a clear line of sight between the

base and handset. Any obstruction

between the base and handset will

reduce the range significantly. 

With the base indoors and handset

either indoors or outdoors, the range

will normally be up to 50 metres.

Thick stone walls can severely affect

the range.

The  icon on your handset display

indicates when you are in range of the

base. When it flashes and you hear a

warning beep, you are out of range

and will need to move closer to the

base.

Do not connect the telephone line

cord to the telephone line wall socket

until the handset is fully charged.
Only use the telephone line

cord provided.

The base station should be plugged

into the mains power socket at all

times.

Getting started

6

8474 Studio 3500 UG Iss2 [2]  25/10/07  16:37  Page 6