Brother MFCP-2000 Quick Setup Guide
- 14 -
Using the Remote Printer Console Main Program
Type
C:\RPCX>RPCX
and press the
Enter
key to start the Remote Printer
Console main program.
The Main Screen will appear on your
computer screen as shown on the right.
computer screen as shown on the right.
Remote Printer Console
Direct_Access Printer_Setup Console_Config Guide
Current Status
Status
Ready
Media Type Regular
Emulation
Auto
Paper Size Letter
Orientation Portrait
Orientation Portrait
Quality
Normal
Copies
1
Memory Size 1048576 Bytes
[
/
] Select
[Enter]Setting
[Alt+Character] Menu
[F1] Help
[Esc] Exit
The RPC gets the current settings information from your machine when it starts if bi-
directional communication is enabled between your computer and machine. Otherwise, the
RPC shows its default settings. If you want to change settings, move the cursor to the desired
item and select the desired setting by using the
directional communication is enabled between your computer and machine. Otherwise, the
RPC shows its default settings. If you want to change settings, move the cursor to the desired
item and select the desired setting by using the
Enter
and
cursor
keys. Then, press the
Enter
key to make the selected setting valid. If you use a mouse, click the desired item to
change the setting.
Additionally, there are four sub-menus as shown in the table below. Select a sub-menu by
clicking the desired sub-menu with the mouse, by using the
clicking the desired sub-menu with the mouse, by using the
cursor
key and the
Enter
key,
or by using the keys shown below to switch the screen to the sub menus.
Menu
Press the keys Functions
Direct Access
Alt + D
You can directly control printer functions such as Print
Form, Self Print, Reset Printer, Sleep Control.
Form, Self Print, Reset Printer, Sleep Control.
Machine Setup
Alt + P
You can enter the setting mode to change further
machine settings, such as, margin settings, continue
mode, reprint function, font, and sleep mode.
machine settings, such as, margin settings, continue
mode, reprint function, font, and sleep mode.
Console Config
Alt + C
You can change the environment settings for the RPC
program: color, Status Monitor configuration, etc.
program: color, Status Monitor configuration, etc.
Guide
Alt + G
You can get into the Guide mode.
Help
F1
You can get On-Line help about the current highlighted
item by pressing F1.
item by pressing F1.