Brother HL-6050D Owner's Manual

1 - 7   ABOUT THIS PRINTER

■

Before you buy a lot of paper, please test some to make sure that the paper is suitable.

■

Use paper that is made for plain-paper copying.

■

Use paper that is 75 to 90 g/m

2

 (20 to 24 lb).

■

Use neutral paper. Do not use acidic or alkaline paper.

■

Use long-grain paper.

■

Use paper with a moisture content of approximately 5%.

■

This printer can use recycled paper that meets the DIN 19309 specification.

Do not use ink jet paper, it may cause a paper jam and damage your printer. 

To help you choose which paper to use with this printer, see Important information for choosing your 
paper on page A-5.

Xerox Premier 80 g/m

2

 

Xerox 4200DP 20 lb

Xerox Recycled Supreme 80 g/m

2

3M CG3300

3M CG 3300

Avery laser label L7163

Avery laser label #5160

When you print on smaller sized short-grain paper (A5, A6 and Executive), do the following:

Go to the Basic tab of the printer driver, in the Media Type option select Envelopes. And then, at 
the back of the printer, open the back output tray and push down the two blue tabs one on the left 
and one on the right hand side (as shown in Figure 1-4). When you have finished printing, close the 
back output tray to reset the two blue tabs back to their original position.