Brother HL-760PLUS Quick Setup Guide

12

English: HL-YL Quick Setup Guide, Body

Before you install the program, make sure that you have the following hardware and
software:

DOS

Version 3.3 or later

Monitor

EGA/VGA or compatible

Option

Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)

Follow these steps to install the remote printer console program:

1. Make sure your printer is connected to your computer and is ready (On-line).

2. Start your computer. If you are in Windows, exit and return to the DOS prompt. You must

be in the DOS prompt to proceed with installation.

3. Insert the supplied disk into your floppy disk drive (A: or B:).

4. Select drive A or B to be used by typing

A: or B: after the DOS prompt and
pressing the Enter key.

 C:\>A:

5. Type RPCSETUP and press the Enter

key.

 A:\>RPCSETUP

6. Follow the instructions on the screen.

Type C:\RPCX>RPCX and press the Enter
key to start the Remote Printer Console
main program.

The Main Screen will appear on your
computer screen as shown on the right.

Remote Printer Console

Direct_Access  Printer_Setup  Console_Config  Guide

Current Status

Status

Ready

Media Type   Regular

Emulation

  Auto

Paper Size   Letter
Orientation  Portrait

Quality

  Normal

Copies

  1

Memory Size  1048576 Bytes

[

↑

/

↓

] Select

[Enter]Setting

[Alt+Character] Menu

[F1] Help

[Esc] Exit

The RPC gets the current settings information from your printer when it starts if bi-
directional communication is enabled between your computer and printer. Otherwise, RPC
shows its default settings. If you want to change settings, move the cursor to the desired item
and select the desired setting by using the Enter and Cursor keys. Then, press the Enter key to
make the selected setting valid. If you use a mouse, click the desired item to change the
setting.