Brother MD-611 Owner's Manual

 

BAS-300G, BAS-311G, BAS-326G 

52

If you press the STOP switch (1) while sewing or test feeding is in progress, the CAUTION indicator (2) will illuminate and 
the sewing machine will stop immediately. 

<Clearing> 
1.  Press the RESET key (3). 

•  The thread will be trimmed, and then the CAUTION 

indicator (2) will switch off and the buzzer will stop 
sounding. 

2. If you do not wish to continue sewing, press the RESET 

key (3) once more. 

•  The program number will flash. Carry out preparation 

for the next sewing. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

If you have pressed the STOP switch (1) at times such as if the thread breaks while sewing or the lower thread runs out, you 
can resume sewing from the point where the thread ran out. 

  Press the RESET key. 

•  The thread will be trimmed, and then the CAUTION indicator will switch 

off and the buzzer will stop sounding.

   

 

  Press the    key to return to the position where sewing stopped. 

•  When you press the   key, the feed mechanism will move backward 

one stitch at a time, and when you press the   key, it will move forward 
one stitch at a time. (The feed will move quicker if you keep the key 
pressed down.) 

 

  Depress the foot switch to the 2nd step. 

(If using a two-pedal foot switch, depress the start switch.)

 

• 

The sewing machine will start operating and sewing will start.

 

 
 

The thread wiper switch (1) can be used to turn the thread 
wiper (2) on and off. 

2nd step 

2264B

4982Q 

4983Q

4443Q

4441Q