Braun MD 9000 User Manual

 

7

 

Our products are engineered to meet the 
highest standards of quality, functionality 
and design. We hope you thoroughly 
enjoy your new Braun Oral-B appliance.

The Braun Oral-B Plak Control oral 
irrigator removes remaining food parti-
cles from between your teeth, while it 
also effectively massages your gums. 
For this reason, the oral irrigator should 
always be used after brushing your teeth.

Prior to using any Braun Oral-B appliance 
we recommend that you carefully read 
the following use instructions so that 
you and your family know how to best 
operate the unit safely.

 

Check the cord occasionally for any 
damage. Should this be the case, unplug 
the motor part 

 

2

 

 immediately and take 

the appliance to a Braun Service Centre. 
A damaged or non-functioning unit may 
no longer be used.

 

1

 

Water container

 

2

 

Motor part

 

3

 

Removable compartment for 
attachable jets 

 

4

4

 

Four attachable jets with different 
colour markings

 

5

 

Water impact control

 

6

 

Press button for maximum water 
impact in the on/off switch 

 

7

7

 

On-/off switch

 

8

 

Irrigator handle

 

9

 

Cord storage

 

j

 

Connections for the charging unit of a 
plaque remover, Braun Oral-B Plak 
Control

 

k

 

Wall holder

 

l

 

Two screws with wall plugs

 

Your oral irrigator comes with a wall 
holder 

 

k

 

 for the motor part 

 

2

 

. Use the 

enclosed screws and wall plugs 

 

l

 

 to 

mount (a). The two grooves 

 

m

 on the 

back of the motor part 2 are pushed 
down onto the hooks n of the wall holder 
k

. The cord storage compartment 9 

offers practical storage of the cord. Only 
use as much cord as you need to reach 
the socket.

Voltage: 220–240 Volt (~) ac, 50–60 Hz
Power intake: 20 Watt (therefore also 
suitable for shaver sockets)
Max. operatiog time: 20 minutes
Cooling off time: 2 hours
Water capacity: approx. 600 ml
Number of impulses: approx. 500–1000 
impulses per minute, continuously 
adjustable

Turn on the oral irrigator by pushing the 
on/off switch 7 up. Turn it off by sliding 
the on/off switch back to its initial 
position (i.e. below the arrow).

The water impact control 5 regulates the 
impulse pressure: gentle = 2, strong = 8. 
The water impact is continuously variable 
and electronically controlled. You may 
press the button 6 in the on/off switch 7 
to obtain maximum water impact, inde-
pendent of the impact shown (2–8). 
By this, even the most resistant food 
particles can be removed from between 
the teeth.

After connecting the unit to a socket, 
remove water container 1 and fill with 
lukewarm water. Then place the water 
container firmly onto the unit (c). Before 
using for the first time, allow the water to 
run through completely. Take the handle 

4714058_MD9_S.4-30.fm  Seite 7  Freitag, 3. Mai 2002  11:09 11