Brother HL-2400CEN Owner's Manual

USER’S GUIDE

4–60

 

 The 

 button works in two ways according to the 

 LED

status.
 

 
 When the printer is off-line and there is data remaining in the printer
memory, the 

 LED comes on. Pressing the 

button

executes a form feed and prints the remaining data.
 
 If you set the number of copies with the 

 button and press the 

button during copy printing, the printer suspends the form feed operation.
 
 Pressing the 

 button again resumes the form feed operation.

 
 If no data remains in the printer memory and you press the 

button, the printer ignores this button operation.
 

 ✒  Note
 If you want the printer to print the remaining data automatically, you can
set the auto form feed function with the 

 button. See “

” in this chapter.

 

 
 You can reprint the last print job without sending it from the computer
again. When you press the 

 button with the 

 LED off,

the printer reprints the pages of the last print job. You can use this
function to recover printing when a paper jam has occurred.
 
 After printing is finished, set the printer off-line and press the 

 button once, so that the printer prints the pages of the last print job.

 However, if there is not enough memory to keep all the pages of the last
print job, the printer will print only the last page of the last job.
 
 When you press the 

 button one or more times during

reprinting, you can set the number of copies to reprint. The printer
reprints the last job the number of times you press the button.
 

 ✒  Note
 The reprint data remains in the printer’s memory until the printer is reset
or the emulation, or some settings, are changed. After you have reprinted
confidential data, be sure to reset the printer to clear it from the printer
memory.