Brother HL-2400CEN Owner's Manual
USER’S GUIDE
5-42
2. Remove the two screws and cover plate from the MIO interface slot.
3. Unpack the MIO card and hold it by its edge.
✒ Note
Do not touch the card surface. If static electricity collects, it damages the
card.
Do not touch the card surface. If static electricity collects, it damages the
card.
4. Insert the card until it is securely seated.
5. Secure the MIO card with the two captive screws on the card.
6. Retain the cover plate and two screws removed in 2 in case you want
to remove the MIO card later.
Fig. 5-52 Installing the MIO Card
RAM Expansion
This printer has 32 Mbytes of memory standard and 2 slots for optional
expansion memory. The memory can be expanded up to 288 Mbytes by
installing commercially available dual in-line memory modules
(DIMMs). (The standard memory fitted can vary depending on the printer
model and country.)
This printer uses memory modules which are:-
100 pins, no-parity, SDRAM with 64Mbit or more.
This printer is not compatible with Extended Data Output (EDO) DIMM,
or DIMM which uses 16Mbit SDRAM.
expansion memory. The memory can be expanded up to 288 Mbytes by
installing commercially available dual in-line memory modules
(DIMMs). (The standard memory fitted can vary depending on the printer
model and country.)
This printer uses memory modules which are:-
100 pins, no-parity, SDRAM with 64Mbit or more.
This printer is not compatible with Extended Data Output (EDO) DIMM,
or DIMM which uses 16Mbit SDRAM.
MIO Card
MIO Interface Slot