Boss Audio Systems DR-670 User Manual
59
Chapter 3 Recording and Editing Patterns (Pattern Edit Mode)
Chapter
3
b. Tap a key pad, and continue holding it
down instead of releasing it.
c. While continuing to hold down the key pad,
press [
] to specify Step 2-4.
fig.03-19
d. Release the key pad.
fig.03-20
■
(6-2)
Confirm the Recorded
Sounds
1. If recording is in progress, press [STOP] to
stop the recording.
The REC indicator goes out.
The REC indicator goes out.
2. When you press [START], the recorded
pattern is played.
3. Press [STOP] to stop the performance.
<7>
Record the Fill Pattern
* The Beat, Measure, and Drum Kit settings are
common to both the basic pattern and the fill
pattern.
pattern.
■
(7-1) Select the Fill Pattern
1. With the performance stopped, press
[FILL].
If there is no data recorded to that fill
pattern, check whether or not the basic
pattern has been copied.
If there is no data recorded to that fill
pattern, check whether or not the basic
pattern has been copied.
fig.03-21
2. When copying, press [
].
When recording a new pattern instead of
copying, press [
copying, press [
].
■
(7-2A) Do Realtime Recording
■
(7-2B) Do Step Recording
■
(7-3) Confirm the Fill-In
When you have finished recording the fill
pattern, try using the Fill-In function (p. 50) to
check that the performances of the basic pattern
and the fill pattern join together smoothly.
pattern, try using the Fill-In function (p. 50) to
check that the performances of the basic pattern
and the fill pattern join together smoothly.
* To return to recording of basic patterns, either
press [FILL] once more, or directly select the
pattern by entering the pattern number.
pattern by entering the pattern number.