Bosch Appliances Home Security System 00P User Manual

2 4 "

3 6 "

2 4 "

3 6 "

2 4 "

6 "

2 4 "

6 "

3 2 "

3 2 "

8 "

8 "

1 2 "

1 2 "

3 2 "

3 6 "

3.000

O

11.000

O

4X

1.000

O

4.000

4.000

7.778

7.778

13.000

13.000

BASED ON A 11.00" B.C.

!

!

Bosch Security Systems

10 October 2003

Figure 2 Reinforcement Bars

Reinforcement bars (12)

PV4 Anchor jig (if applicable)

  3.     FOR ANCHOR BOLT INSTALLATIONS:  
          Pour concrete per manufacturer's directions, making sure that
          the wiring conduit is in the center of the pad. See Figure 3
          (next page) for dimensions of the bolt pattern and suspend 
          appropriate bolts in the concrete around the wiring conduit. 
          Leave 2" to 3" of the Bolts protruding above the pad. If you are
          using leveling nuts, leave 4" to 6" protruding. 

Figure 3 Anchor Bolt Dimensions

NOTE: Prepare the concrete per manufacturer's  
directions. The concrete must have a compressive 
strength of 3000 psi, and must be fabricated following 
ACI318-89 requirements.  Allow the concrete 
foundation to cure thoroughly before proceeding with 
the installation.

Figure 4 View of Concrete Foundation

 1.     Place the pole on the pad with the holes on the Base Plate 
         aligned with the bolts of the anchor bolts or anchor jig 
          (Figure 5).

2.      Remove the access opening plates at the bottom and top.  

NOTE:  Be sure that the pole is oriented properly, with the
              carriage.