Bosch Appliances Home Security System GV2 User Manual

GV2 Series Control Panels | Owner's Manual Supplement  

 

 

Bosch Security Systems, Inc. | 2/07 | F01U063791-01 

15 

 

7.  The first sub-function that appears is 

CYCLE DOOR?

. You can 

cycle through the three sub-functions by pressing [PREV] and 
[NEXT]. 

 

On a D1260 Keypad 
1.  Ensure that the display shows idle disarmed text. 
2.  Press the [COMMAND] key. The display shows 

SYSTEM 

COMMAND

. 

3.  Press [4] and [6]. 

 

 

You can use the function list in place of steps 2 and 3 to 
start this function. 

1.  Press the [

Menu>

] soft key to enter the function list. 

2.  Press [

Next>

] repeatedly until you reach the 

DOOR 

CTRL?

 prompt.  

3.  Press the [

Door Control ? >

] soft key. 

4.  All authorized door control function sub-functions are listed. 

Press the corresponding soft key to enter the sub-function. 

1.  To unlock an access door briefly and allow a person into an 

area, press [ENT] at the 

Cycle Door?

 prompt. 

The display shows 

CYCLE 1 2 3 4 5 6 7 8

 if all doors are in 

a normal state and available. If a door is not in a normal state, 
the number of the door is replaced with one of the symbols 
indicated in Table 3. 

 

 

Symbol Description 

--- 

Door is not active, not in scope, or user does not have 
access level authority 

C 

Door is timed door sequence 

U 

Strike and shunt are latched active (held open) 

X 

Strike and shunt are deactivated (secured) 

P 

There is a problem with the door; call your security 
company