Bosch Appliances Home Security System GV2 User Manual

GV2 Series Control Panels | Owner's Manual Supplement

Bosch Security Systems, Inc. | 2/07 | F01U063791-01

For systems with access control, the following prompts are
available:

ADD CARD?

CHANGE CARD?

, and

SUB USER

ID?

. Refer to

Systems With Access Control on page 20 for

details.

The system does not accept a passcode that is within two
digits of an existing passcode. This is to avoid conflicts with
duress passcodes. For example, if passcode 123 is already
programmed in the system, the system does not accept
121, 122, 124, or 125 as passcodes.

ADD LEVEL?

appears. If the user number already exists,

CHANGE LEVEL?

appears. Press [ENT].

10.

VALID AREA 1?

appears. If you wish this user number to be valid

in Area 1, press [ENT]. If not, press [NEXT].

11.

AUTH LEVEL

appears. Assign the authority level you wish the user

number to have for this area and press [ENT]. Record this
information.

12.

VALID AREA 2?

appears. Enter the information necessary for

the areas in the scope of the keypad by following steps 10 and
11 for each area (up to 8 areas).

13.

LEVEL ADDED

LEVEL CHANGED

appears when all area

assignments are made. Press [ENT].

At the end of each function, press [ESC] to return to the

ENTER USER #

prompt. Press [ESC] again to return to idle

text.

Systems With Access Control

If your system includes access control features, such as card
readers at doors, the following prompts can appear during the
ADD USER? procedure.

ADD CARD?

(

CHANGE CARD?

)

1. If the user has card or token access to the building or area,

press [ENT] at the

ADD CARD?

prompt, or at the

CHANGE

CARD?

prompt if the user already has a card or token.

PRESENT CARD

appears. Present the card at the card reader

and wait for the tone.

3. If the reader identifies the card or token correctly, a tone

sounds and the keypad shows

CARD ADDED

, or

CARD CHANGED

if the user already has a card or token. Press [ENT].