Bosch Appliances Home Security System GV2 User Manual
GV2 Series Control Panels | Owner's Manual Supplement
Bosch Security Systems, Inc. | 2/07 | F01U063791-01
15
7. The first sub-function that appears is
CYCLE DOOR?
. You can
cycle through the three sub-functions by pressing [PREV] and
[NEXT].
[NEXT].
On a D1260 Keypad
1. Ensure that the display shows idle disarmed text.
2. Press the [COMMAND] key. The display shows
1. Ensure that the display shows idle disarmed text.
2. Press the [COMMAND] key. The display shows
SYSTEM
COMMAND
.
3. Press [4] and [6].
You can use the function list in place of steps 2 and 3 to
start this function.
start this function.
1. Press the [
Menu>
] soft key to enter the function list.
2. Press [
Next>
] repeatedly until you reach the
DOOR
CTRL?
prompt.
3. Press the [
Door Control ? >
] soft key.
4. All authorized door control function sub-functions are listed.
Press the corresponding soft key to enter the sub-function.
2.9.3
Cycle Door?
1. To unlock an access door briefly and allow a person into an
area, press [ENT] at the
Cycle Door?
prompt.
The display shows
CYCLE 1 2 3 4 5 6 7 8
if all doors are in
a normal state and available. If a door is not in a normal state,
the number of the door is replaced with one of the symbols
indicated in Table 3.
the number of the door is replaced with one of the symbols
indicated in Table 3.
Table 3: Key to Symbols
Symbol Description
---
Door is not active, not in scope, or user does not have
access level authority
access level authority
C
Door is timed door sequence
U
Strike and shunt are latched active (held open)
X
Strike and shunt are deactivated (secured)
P
There is a problem with the door; call your security
company
company