Bosch HBN3550UC Quick Setup Guide

English 14

1. Turn on power at the breaker.
2. Test the oven mode. 

Select the BAKE mode. See the Use and Care Manual 
for detailed operation instructions.

3. Verify that the oven light comes on and the oven 

begins to preheat.

4. Test the door lock. 

Set the SELF CLEAN mode. Confirm that the door 
locks when the lock icon appears in the display. 

5. If installing a double oven, test the second oven as 

well.

6. If any of the tests do not result as explained above, 

contact Bosch service for assistance. Otherwise, the 
installation is complete at this time.

Before Calling Service

See Use and Care Manual for troubleshooting information. 
Refer to the Warranty in the Use and Care Manual.

To reach a service representative, see the contact 
information at the front of the manual. Please be prepared 
with the information printed on your product data plate 
when calling. 

The data plate shows the model and serial number. Refer 
to the data plate on the appliance when requesting service. 

The data plate is located on the underside of the control 
panel:

 

1. Hold the door firmly in 

both hands.

2. Hold the door at a 30º 

angle from the closed 
position and insert 
hinges into the slots.
You may need to rock 
the door forward and 
backward slightly to 
seat the hinge feet.

3. The door may need to 

be removed and re-
inserted until the 
hinges sit correctly in 
the slots.

4. Open door all the way 

to expose hinges, 
levers, and slots.

5. Push levers foreward 

and down until seated 
on the bracket.

6. Close and open door 

slowly to be sure it is 
correctly and securely 
in place. Door must be 
straight, not crooked.

Data Plate