Western Digital My Cloud Mirror User Manual

GETTING STARTED

 11 

WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE 

 

USER MANUAL

1.   Using the provided Ethernet cable, connect one end of the Ethernet cable to the 

Ethernet port located on the back of the device.

2.   Connect the other end of the Ethernet cable directly into a router or network switch port.

3.   Connect one end of the power adapter into the power supply socket on the back of the 

device.

4.   Plug the other end of the power adapter into a power outlet. The unit powers up 

automatically.

5.   When the power LED on your device turns a solid blue, continue to “Getting Started 

Using Online Setup Software” on page 11.

The online setup software walks you through the steps to easily connect your device to your 
home or small office network. Use the following steps to download and run the online setup 
software, discover the device, and get started using it. The online setup software is available 
from WD’s Online Learning Center at 

Downloading and Installing the Online Setup Software

After connecting your device:

1.   Open a web browser. (For browser requirements, see “Web Browsers” on page 6.)

2.   In the address field, type

to display the Welcome 

to the Learning Center page:

Important:  Wait for the WD My Cloud Mirror device to finish powering up 

(approximately three minutes) before configuring it. You will know 
it is ready when the power LED stops flashing and turns blue.