Wayne-Dalton 8200 Windload User Manual

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local

yellow pages business listings or go to the Find a Dealer section online at

Safety glasses

Flat tip screwdriver

1/4”, 3/8”, 7/16”, 1/2” &

9/16” Wrenches

7/16”, 1/2” & 9/16”

Socket

Phillips head screw-

driver

Ratchet wrench

Power drill

Sawhorse

Gloves

3/8”, 7/16” Socket driver

hammer

Vice grips

Step ladder

Tape measure

Level

Vice clamps

Pencil

9/32”, 1/2”, 3/16” & 1/8” Drill

bits

Approved winding bars

1/4” Torx bit

IMPORTANT: COUNTERBALANCE SPRING TENSION MUST ALWAYS BE RELEASED BEFORE ANY ATTEMPT IS MADE TO START REMOVING AN EXISTING DOOR.

A POWERFUL SPRING RELEASING ITS ENERGY SUDDENLY CAN CAUSE SEVERE OR FATAL INjURY. TO AVOID INjURY hAVE A TRAINED DOOR SYSTEMS TEChNICIAN, USING
PROPER TOOLS AND INSTRUCTIONS, RELEASE ThE SPRING TENSION.

For detailed information see supplemental instructions “Removing an Existing Door /Preparing the Opening”. These instructions are available at no charge from Wayne-
Dalton, a Division of Overhead Door Corporation, P.O. Box 67, Mt. hope, Oh 44660, or at www.Wayne-Dalton.com.