Matsushita LSM40-2 Leaflet
GENERAL INFORMATION
INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO
®
DAVE LENNOX SIGNATURE COLLECTION MODELS LSM40-2 & LSM45-2 DIRECT VENT GAS FIREPLACES
INSTALLATION INSTRUCTIONS
Step 1 Using a 7/32” allen wrench and 7/16” nut driver, loosely assemble
the parts as shown in Figure 1 and Figure 2 (do not tighten yet).
Step 2 Adjust the L-bracket to the height needed for this installation (slot
allows up to 1 inch vertical adjustment). When you are satisfi ed
that the screen will stand stable in front of the fi replace, then
tighten the nuts on both sides.
that the screen will stand stable in front of the fi replace, then
tighten the nuts on both sides.
750,184M REV. B
05/2006
05/2006
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
Figure 1
Kit Contents:
Tools Required:
1 Ea. Screen Assembly
2 Ea. Bottom Legs
2 Ea. Long Screws
2 Ea. Short Screws
2 Ea. Long Spacers
2 Ea. Bottom Legs
2 Ea. Long Screws
2 Ea. Short Screws
2 Ea. Long Spacers
7/32” Allen Wrench
7/16” Nut Driver
7/16” Nut Driver
H5051
DASK-LSM40-2 Dual Arch Screen Kit, LSM40-2
H5052
SK-LSM40-2
Classic Screen Kit, LSM40-2
H5053
ASK-LSM40-2 Arch Screen Kit, LSM40-2
H5054
DASK-LSM45-2 Dual Arch Screen Kit, LSM45-2
H5055
SK-LSM45-2
Classic Screen Kit, LSM45-2
H5056
ASK-LSM45-2 Arch Screen Kit, LSM45-2
These optional decorative freestanding fi rescreen panels are designed
to enhance the beauty of the fi replace and helps prevent direct human
contact with the hot glass surface.
to enhance the beauty of the fi replace and helps prevent direct human
contact with the hot glass surface.
A chain is also provided for additional safety. When attached to the
fi replace, it helps prevent the screen from tipping.
fi replace, it helps prevent the screen from tipping.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Long Screws
Short Screws
Long Spacers
Short
Spacers
Spacers
Nuts
L- Brackets
Contoured Legs
Dual Arch Screen
Arch Screen
Screen
L- Bracket
Nut
Screen
Assembly
Assembly
Short Spacer
Long Spacer
Contoured Leg
Figure 2 - Assemble Legs & L-Brackets to Screen
Side View
Fireplace Side
Front Side
Assembly
Completed
Completed
1
WARNINGS
Hot! Do not touch! These decorative screen
panels are NOT heat guards. The glass behind the
screens will be hot during operation and will retain
heat for a while after shutting off the appliance.
Severe burns may result. Carefully supervise
children in the same room as appliance.
panels are NOT heat guards. The glass behind the
screens will be hot during operation and will retain
heat for a while after shutting off the appliance.
Severe burns may result. Carefully supervise
children in the same room as appliance.
• As with any similar heating appliance, surfaces of the
frame, the door and appliance can become very hot.
Kit Contents
(dual arch screen shown)
(dual arch screen shown)
Screen
Assembly
Assembly
Chain
Instruction Sheet
Chain
GENERAL INFORMATION
INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO®
DAVE LENNOX SIGNATURE SERIES MODELS LSM40-2 & LSM45-2 DIRECT VENT GAS FIREPLACES
INSTALLATION INSTRUCTIONS
Step 1 Using a 7/32” allen wrench and 7/16” nut driver, loosely assemble
the parts as shown in Figure 1 and Figure 2 (do not tighten yet).
Step 2 Adjust the L-bracket to the height needed for this installation (slot
allows up to 1 inch vertical adjustment). When you are satisfi ed
that the screen will stand stable in front of the fi replace, then
tighten the nuts on both sides.
that the screen will stand stable in front of the fi replace, then
tighten the nuts on both sides.
750,184M REV. A
04/2006
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
Figure 1
Kit Contents:
Tools Required:
1 Ea. Screen Assembly
2 Ea. Bottom Legs
2 Ea. Long Screws
2 Ea. Short Screws
2 Ea. Long Spacers
2 Ea. Short Spacers
4 Ea. Nuts
2 Ea. L- Brackets
1 Ea. Instruction Sheet
2 Ea. Bottom Legs
2 Ea. Long Screws
2 Ea. Short Screws
2 Ea. Long Spacers
2 Ea. Short Spacers
4 Ea. Nuts
2 Ea. L- Brackets
1 Ea. Instruction Sheet
7/32” Allen Wrench
7/16” Nut Driver
7/16” Nut Driver
H2229
DASK-LSM40
Dual Arch Screen Kit, LSM40-2
H2230
SK-LSM40
Screen Kit, LSM40-2
H2231
ASK-LSM40
Arch Screen Kit, LSM40-2
H2232
DASK-LSM45
Dual Arch Screen Kit, LSM45-2
H2233
SK-LSM45
Screen Kit, LSM45-2
H2234
ASK-LSM45
Arch Screen Kit, LSM45-2
These optional decorative freestanding fi rescreen panels are designed
to enhance the beauty of the fi replace and helps prevent direct human
contact with the hot glass surface.
to enhance the beauty of the fi replace and helps prevent direct human
contact with the hot glass surface.
A chain is also provided for additional safety. When attached to the
fi replace, it helps prevent the screen from tipping.
fi replace, it helps prevent the screen from tipping.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Long Screws
Short Screws
Long Spacers
Short
Spacers
Spacers
Nuts
L- Brackets
Contoured Legs
Dual Arch Screen
Arch Screen
Screen
L- Bracket
Nut
Screen
Assembly
Assembly
Short Spacer
Long Spacer
Contoured Leg
Figure 2 - Assemble Legs & L-Brackets to Screen
Side View
Fireplace Side
Front Side
Assembly
Completed
Completed
1
WARNINGS
Hot! Do not touch! These decorative screen
panels are NOT heat guards. The glass behind the
screens will be hot during operation and will retain
heat for a while after shutting off the appliance.
Severe burns may result. Carefully supervise
children in the same room as appliance.
panels are NOT heat guards. The glass behind the
screens will be hot during operation and will retain
heat for a while after shutting off the appliance.
Severe burns may result. Carefully supervise
children in the same room as appliance.
• As with any similar heating appliance, surfaces of the
frame, the door and appliance can become very hot.
Kit Contents
(dual arch screen shown)
(dual arch screen shown)
Screen
Assembly
Assembly
Chain
Instruction Sheet
GENERAL INFORMATION
INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO
DAVE LENNOX SIGNATURE SERIES MODELS LSM40 & LSM45 DIRECT VENT GAS FIREPLACES
DAVE LENNOX SIGNATURE SERIES MODELS LSM40 & LSM45 DIRECT VENT GAS FIREPLACES
INSTALLATION INSTRUCTIONS
Step 1 Using an 7/32” Allen Wrench and 7/16” Nut Driver, loosely as-
semble the parts as shown in Figure 1 and Figure 2 (do not
tighten yet).
Step 2 Adjust the L-Bracket to height needed for this installation (slot
allows up to 1 inch vertical adjustment). When you are satisfi ed
that the screen will stand stable in front of the fi replace, then
tighten the nuts on both sides (snug only - do not over tighten).
Step 3 Place the assembled freestanding screen in front of the fi replace
when in use, in a close proximity to the glass door assembly.
semble the parts as shown in Figure 1 and Figure 2 (do not
tighten yet).
Step 2 Adjust the L-Bracket to height needed for this installation (slot
allows up to 1 inch vertical adjustment). When you are satisfi ed
that the screen will stand stable in front of the fi replace, then
tighten the nuts on both sides (snug only - do not over tighten).
Step 3 Place the assembled freestanding screen in front of the fi replace
when in use, in a close proximity to the glass door assembly.
750,184M REV. NC
3/2005
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
KITS AND ACCESSORIES
Figure 1 - Kit Contents (dual arch screen shown)
Kit Contents:
Tools Required:
1 ea. Screen Assembly
2 ea. long screws
2 ea. short screws
2 ea. long spacers
2 ea. short spacers
4 ea. nuts
2 ea. L- brackets
1 ea. Instruction Sheet
2 ea. long screws
2 ea. short screws
2 ea. long spacers
2 ea. short spacers
4 ea. nuts
2 ea. L- brackets
1 ea. Instruction Sheet
7/32” Allen Wrench
7/16” Nut Driver
7/16” Nut Driver
Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2005
P/N 750,184M REV. NC 3/2005
Page 1 of 1
Instruction Sheet
H2229
DASK-LSM40
Dual Arch Screen Kit, LSM40
H2230 SK-LSM40
Screen
Kit,
LSM40
H2231
ASK-LSM40
Arch Screen Kit, LSM40
H2232
DASK-LSM45
Dual Arch Screen Kit, LSM45
H2233 SK-LSM45
Screen
Kit,
LSM45
H2234
ASK-LSM45
Arch Screen Kit, LSM45
These optional decorative freestanding fi rescreen panels are designed to
enhance the beauty of the fi rpleplace and to provide some protection from
any accidental contact with the hot glass surface.
enhance the beauty of the fi rpleplace and to provide some protection from
any accidental contact with the hot glass surface.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifi cations, prices and the discontinuance of colors, styles and products.
Consult your local distributor for fi replace code information.
Consult your local distributor for fi replace code information.
LENNOX HEARTH PRODUCTS
1110 West Taft Avenue
Orange, CA 92865
1110 West Taft Avenue
Orange, CA 92865
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Screen
Assembly
Assembly
Long Screws
short screws
Long Spacers
short spacers
Nuts
L- Brackets
Contoured Legs
Dual Arch Screen
Arch Screen
Screen
Figure 3 - Screen Styles
L- Bracket
Nuts
Screen
Assembly
Assembly
Short Spacers
Long Spacers
Contoured Leg
Figure 2 - Assemble Legs & L-Brackets to Screen
Side View
Fireplace Side
Front Side
Assembly
Completed
Completed
Chain
LENNOX HEARTH PRODUCTS
2 Ea. Short Spacers
4 Ea. Nuts
2 Ea. L- Brackets
1 Ea. Instruction Sheet
4 Ea. Nuts
2 Ea. L- Brackets
1 Ea. Instruction Sheet