Linksys X3500 Owner's Manual

Product Overview

Linksys X-Series

The router has two wall-mount slots on its bottom panel . The distance between 

the slots is 75 .6 mm . Two screws are needed to mount the router .

3-5 mm

7-8 mm

1 .5-2 mm

Cisco is not responsible for damages incurred by unsecured wall-

mounting hardware .

Follow these instructions:

1.  Determine where you want to mount the router . Make sure that the wall 

you use is smooth, flat, dry, and sturdy . Also make sure the location is 

within reach of an electrical outlet .

2.  Drill two holes into the wall . Make sure the holes are 75 .6 mm apart .
3.  Insert a screw into each hole and leave 3 mm of its head exposed .
4.  Position the router so the wall-mount slots line up with the two screws .
5.  Place the wall-mount slots over the screws and slide the router down 

until the screws fit snugly into the wall-mount slots .

Print this page at 100% size .  

Cut along the dotted line, and place on the wall to drill precise spacing .

75,6 mm