Medea DVD Player DV-66 User Manual

2.2 Connect to Any Display with A/V Inputs

Simply connect DV-66 to any video display such as a PC monitor or TV with A/V inputs, and you can
start watching the video clips stored on your Compact Flash Card. You can control the track selection
with the optional DV-66K Keypad Controller, and it gives you the ability to control up to 99 tracks on
the DV-66 player.

Caution: DO NOT plug in the power before CompactFlash® Card is inserted into DV-66 card slot. MedeaWiz
recommends that CompactFlash® Card to be inserted into the slot first, and then the power can be applied to the
unit as described later.

Step 1

Plug in the modular end of
A/V cable to the jack located at
the side of DV-66.

Step 2

Plug in the yellow end of the A/V
cable to “Video In,” white end to
“Audio L,” and red end to “Audio R” of your display.

Note:

Normally the A/V inputs are located in the back
of a TV or monitor. For more instructions on how to use
A/V input on your display, consult the manual for
the device.

Step 3

Turn on the power of the display, and change the channel to
the corresponding A/V input channel if necessary.

Note:
For more detailed instructions on how to switch to the corresponding

A/V input channel on the display, consult the manual for that device.