Medea DVD Player DV-66 User Manual
2.2 Connect to Any Display with A/V Inputs
Simply connect DV-66 to any video display such as a PC monitor or TV with A/V inputs, and you can
start watching the video clips stored on your Compact Flash Card. You can control the track selection
with the optional DV-66K Keypad Controller, and it gives you the ability to control up to 99 tracks on
the DV-66 player.
Caution: DO NOT plug in the power before CompactFlash® Card is inserted into DV-66 card slot. MedeaWiz
recommends that CompactFlash® Card to be inserted into the slot first, and then the power can be applied to the
unit as described later.
recommends that CompactFlash® Card to be inserted into the slot first, and then the power can be applied to the
unit as described later.
Step 1
Plug in the modular end of
A/V cable to the jack located at
the side of DV-66.
Step 2
Plug in the yellow end of the A/V
cable to “Video In,” white end to
“Audio L,” and red end to “Audio R” of your display.
cable to “Video In,” white end to
“Audio L,” and red end to “Audio R” of your display.
Note:
Normally the A/V inputs are located in the back
of a TV or monitor. For more instructions on how to use
A/V input on your display, consult the manual for
the device.
of a TV or monitor. For more instructions on how to use
A/V input on your display, consult the manual for
the device.
Step 3
Turn on the power of the display, and change the channel to
the corresponding A/V input channel if necessary.
Note:
For more detailed instructions on how to switch to the corresponding
For more detailed instructions on how to switch to the corresponding
A/V input channel on the display, consult the manual for that device.
3