Logik L1CRDAB13E User Manual

11

GB

1.  Press ALARMS repeatedly to toggle between <Alarm 1 Setup> and <Alarm 2 Setup>. 

 

and 

 will flash on the display. Press SELECT to confirm.

2.  Press     to select alarm<On> or <Off>, then press SELECT to confirm.
3.  Press     to adjust the alarm time, then press SELECT to confirm.
4.  Press     to select alarm duration (15/30/45/60/90 minutes), then press SELECT to confirm.
5.  Press     to select Buzzer, DAB or FM mode, then press SELECT to confirm.
6.  Press     to select alarm active day (Daily / Once / Weekends / Weekdays), then press 

SELECT to confirm.

7.  Press     to select alarm volume, then press SELECT to confirm.

•

When the alarm sounds, press SNOOZE to temporarily switch off the alarm. The alarm 
switch off time will vary according to the selected alarm duration. Press SNOOZE repeatedly 
to select the alarm switch off time. 

15 minutes

5 or 10 minutes

30 minutes

5, 10 or 15 minutes

45 / 60 /90 minutes

5, 10, 15 or 30 minutes

The LCD display will show “Snooze mm:ss” to indicate that snooze is on.

•

Turn off the alarm by pressing STANDBY.

This function allows you to programme the unit to switch off by itself after a set sleep time. Make 
sure the radio is switched on before setting the sleep time.
1.  To activate the sleep function, press SLEEP repeatedly. The sleep time will toggle as the 

sequence below on every press:

2.  Press SELECT to confirm. “ ” will show on the LCD display.
3.  When the sleep timer reaches zero, the radio will turn off. To turn the sleep function off 

while the sleep timer is still counting down, press SLEEP` repeatedly to select “Sleep Off”. “
” will disappear from the LCD display.

 L1CRDAB13E_IB_130128_Michelle.indb   11

28/1/13   12:20 PM