Logik L1CRDAB13E User Manual
18
GB
Maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
•
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
•
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
•
Do not spray aerosol at or near the unit.
Hints and Tips
If a problem occurs, it may often be due to something very minor. The following table contains
various tips.
various tips.
Problem
Cause / Solution
No Sound
Adjust the volume.
Static Sound
Signal reception is too low. Adjust the FM aerial or move the unit
to a stronger signal location.
to a stronger signal location.
Sound is distorted
Volume is too high. Adjust the volume.
Desired station not found
Weak signal. Search manually.
The display shows “DAB”
and “Manual Tune” after
auto scanning
and “Manual Tune” after
auto scanning
No DAB coverage in your area or poor reception. Adjust the
position of the FM aerial.
position of the FM aerial.
Poor reception. Adjust the position of the FM aerial.
The display is blank
This may occur if the broadcaster changes the label of a service
or removes a label while tuned. The unit will try to re-tune or
perform a scan.
or removes a label while tuned. The unit will try to re-tune or
perform a scan.
If the unit is not working properly, disconnect the power source and then
reconnect it.
L1CRDAB13E_IB_130128_Michelle.indb 18
28/1/13 12:20 PM