Lucent Technologies Speaker 585-210-940 User Manual

Usage: olds -mirrored -check_disks|

-mirrored -mk_files|-metadbs|-cleanup|

-mirrored -setup [disk name]

Explanation: You have mistyped a command. 

Retry the command. See Chapter 3 for information about 
olds command syntax.

Warning: inode blocks/cyl group (230 >= 

data blocks (135) in lost cylinder group.  

This implies 2160 sector(s) cannot be 

allocated. 

Explanation: Some sectors will not be used by the filesystem. This is 

just a warning; the filesystem should be fine. 

Warning: script does not support this 

configuration, configure manually

Explanation: The olds script is supported only with the hardware 

described in Chapter 1.

Verify that you have appropriate hardware. If you need 
extra disks for purposes other than mirroring CMS, you 
may attach them after disk mirroring has been installed 
and has been verified to be running correctly.

 x25netd: failed to open

driver /dev/hih

x (Bad file number [n]

)

Enter the following command:

/cms/toolsbin/lnSBusdev 

You must be root in order to run this 

command.

Explanation: You are not logged in as the 

root user, but you must be in 

order to run the command.

Log in as 

root and retry the command.

You need to have at least one disk setup, 

before attaching one.

Install and configure 

Solstice DiskSuite before attempting 

this task.