Digicom Pocket GSM 8D0114 Leaflet
Product codes
8D0114
For further information visit our
website
http://www.digicom.it
TECHNICAL FEATURES
te
l
850/900/1800/1900MHz Quad-Band modem
l
GPRS Class 10
l
Integrated TCP/IP
l
Standard ETSI GSM Phase2+ compliant
l
Radio GSM 900MHz Class4 (2Watt output power)
l
Radio DCS 1800Mhz Class1 (1Watt output power)
l
External antenna (SMA connector)
l
AT commands support (GSM07.07 and 07.05)
l
Data transmission up to 9600 bps V.32, V.22bis, V.22, V.21
l
V.110 ISDN data transmission up to 9600bps
l
Non Transparent mode (RLP)
l
SMS support PDU and Text mode (MT/MO)
l
Gr.3 FAX support up to 9600bps
l
Voice support
l
4 Digital inputs
l
2 Analog inputs
l
2 Outputs open collector
l
Protected slot for SIM card (Plug-In 3V)
l
Data interface: RS232 9pin (V24/V28)
l
Power supply led indicator
l
Status led indicator (logged/not logged, connected)
l
RJ6 Connector for voice functions
l
Power Supply: from 5 to 32Vdc
l
Low consumption
l
Mechanic dimensions: 87 x 75 x 25mm, Weight: 130 gr.
l
Full Type Approval (R&TTE)
l
CE Mark
very fast connection time to ISDN access without any
additional signal conversion.
Pocket GSM can manage SMS both in PDU and Text
format and it’s compliant with all the communication
softwares for the SMS management.
Furthermore it has 4 digital inputs and 2 outputs
through which you can read inputs contacts and control
devices connected to the outputs.
There are also 2 analog inputs for the connection of
sensors (thermometer, level meters, etc.).
You will be able to have a complete application using a
sole device that will allow to send an SMS after detecting
an input status change or to analyze the received SMS
and to pilot an output contact.
On request it is possible to develop special versions of
Pocket GSM, using the GPRS fucntionality class 10 (4+2)
together with the built-in TCP/IP protocol, the automatic
management of inputs and outputs through SMS and the
detection of DTMF tones.
additional signal conversion.
Pocket GSM can manage SMS both in PDU and Text
format and it’s compliant with all the communication
softwares for the SMS management.
Furthermore it has 4 digital inputs and 2 outputs
through which you can read inputs contacts and control
devices connected to the outputs.
There are also 2 analog inputs for the connection of
sensors (thermometer, level meters, etc.).
You will be able to have a complete application using a
sole device that will allow to send an SMS after detecting
an input status change or to analyze the received SMS
and to pilot an output contact.
On request it is possible to develop special versions of
Pocket GSM, using the GPRS fucntionality class 10 (4+2)
together with the built-in TCP/IP protocol, the automatic
management of inputs and outputs through SMS and the
detection of DTMF tones.
Pocket GSM is suitable in the following applications:
l
Telemetry
l
Remote measuring and control in energy production
environment
l
Inside gas, water and electrical energy distribution
cabin
l
For the monitoring of ways and railways (traffic
detection, SOS points, etc.) and for traffic lights
remote control
l
On-line public informative systems (rotating
advertising messages on ways, motorways, buses)
l
Image transmission in security applications
l
In electronic funds transfer devices (i.e. POS)
l
Bypass of the last mile through the GSM network, for
telecommunications operators
Data collection
center
Pocket GSM
Serial
device
(i.e. PLC...)
serial
cable
serial
cable
GSM/GPRS
Pocket GSM
Code
Description
8D0114
Pocket GSM/GPRS
8D6063
PSU PocketGSM - Power supply with connector (IN: 230Vac OUT: 12Vcc)
8D4272
Dual-Band antenna with SMA/m connector, cable length 3 m
8E4150
Dual-Band antenna with SMA/m connector, length 0,8 m
8E4159
CD65-5 SMA/m-SMA/f cable, length 5 m
9D0527
CD64-1,8 V24/V28 9 pin female serial cable for Pocket GSM
6D1255
I/O cabling 12 wires connector for I/O management