Lead Data VIDEOPHONE BVP 8882 SIP User Manual
Make sure the power indicator
is ON.
is ON.
If auxiliary video input is used
on LCD, select the appropriate
video input for LCD.
on LCD, select the appropriate
video input for LCD.
No image is displayed on LCD
screen
screen
Increase light on the image
and reduce back lighting.
and reduce back lighting.
Video of local view is dark
Aim the BVP 8882 SIP at a
strong white light source
momentarily.
strong white light source
momentarily.
Video in local view has a red cast
Hang up and call again.
Ask the other party call you.
Video connection is not
established correctly
established correctly
Probable cause is bad
connection (noisy line). Hang
up and try again. This time,
ask the other party to call you.
connection (noisy line). Hang
up and try again. This time,
ask the other party to call you.
Green or yellow blocks appear in
the remote picture
the remote picture
Your BVP 8882 SIP is reliable and easy to use. If you encounter any problem
while using this product, please refer to the table below for possible
solutions.
while using this product, please refer to the table below for possible
solutions.
Plug power adapter in the unit.
Plug the power cord in the
power outlet in the wall.
power outlet in the wall.
Turn on the power switch.
Power Indicator OFF
The unit is not responding when
the button is pressed
the button is pressed
Be sure the RJ-45 wire is
plugged into one of the two
" " ports directly on the
s5000.
plugged into one of the two
" " ports directly on the
s5000.
Can not dial a phone number
Plug RJ-45 cable from the
Ethernet device into one of the
two " " ports on the unit.
Ethernet device into one of the
two " " ports on the unit.
9
Trouble Shooting
BVP 8882 SIP User's Manual 53