BMW 2011 328i Sedan Owner's Manual

98

1.

"Settings"

2.

"Lighting"

3.

"Welcome light"

 Welcome lamps are activated and are 

stored for the remote control currently in use.

If you activate the headlamp flasher after 
switching off the ignition with the lamps 
switched off, the low beams come on and 
remain on for a certain time.

1.

"Settings"

2.

"Lighting"

3.

"Pathway light.:"

4.

Set a time of duration, or 0 s to deactivate 
the function.

The setting is stored for the remote control cur-
rently in use.

The daytime running lights light up in switch 
positions 

0, 1 and 3.

1.

"Settings"

2.

"Lighting"

3.

"Daytime running lamps"

 Daytime running lights are activated and 

are stored for the remote control currently in 
use.

Adaptive light control is a variable headlamp 
control system that enables better illumination 
of the road surface. Depending on the steering 
angle and other parameters, the light from the 
headlamp follows the course of the road.

With the ignition switched on, turn the light 
switch to position 

3, refer to page

. 

Standstill function

: to avoid blinding oncoming 

traffic, the adaptive light control directs light 
towards the front passenger side when the 
vehicle is at a standstill.
Adaptive light control is not active when revers-
ing.

The LED next to the symbol for automatic head-
lamp control flashes. Adaptive light control is 
malfunctioning or has failed. Have the system 
checked as soon as possible.

Online Edition for Part no. 01 41 2 604 582 - © 02/10 BMW AG