IronPort Systems ES-1528 User Manual

 Chapter 11 QoS

ES-1528 User’s Guide

Figure 40   ToS Based QoS 

The following table describes the labels in this screen.  

You can configure the switch to assign a higher priority to packets coming into the switch 
from specific IP addresses. Select IP Address Based QoS in the QoS Enhancement Setting 
screen to view the following screen.

Table 20   ToS Based QoS

Mode

Select ToS Based QoS to specify mapping rules between ToS priority and IEEE 802.1p 

priority for incoming packets on the switch. 

Change 

Priority

Configure the following:
•

TOS - Select the ToS priority for which you want to change a priority mapping.

•

Priority - Select the IEEE 802.1p priority you want to assign to the packets with the 

ToS priority you specified in the TOS field.

Click Change to view your changed settings.

TOS, 

Priority

This is a summary table of your ToS priority to IEEE 802.1p priority mappings. The TOS 

column indicates the ToS priority of the incoming packets and the Priority column 

indicates what IEEE 802.1p priority gets assigned to those packets.

Apply 

Change 

Settings

Click this when you have reviewed the changes you want to make and you want to save 

them to the switch’s memory.