IronPort Systems ES-1528 User Manual

Chapter 17 Event Logging

ES-1528 User’s Guide

Figure 52   Logging 

The following table describes the labels in this screen. 

Use this screen to configure a new syslog entry. Click Add Server in the Logging screen to 
view the screen as shown.

Table 33   Logging 

Add Server

Click this to configure a new syslog server. 

Logging Target

Click the RAM or Flash links to view the logs stored on the switch.
Use the columns on the right to select the types of system events each logging 

target should record. Select:
•

Error - to record system failures, such as events which will cause the switch to 

malfunction and events such as invalid user input in the web configurator.

•

Warning - to record non critical errors on the switch. The switch will continue to 

function when warnings are recorded.

•

Info - to record regular system events, such as configuration changes or logins.

•

Debug - to record events which can be helpful for engineering debugging of the 

switch’s function. This field is not recommended to track as it creates many 

messages not helpful to typical users.

For RAM and Flash logs you can also hit Clear to delete all log entries.
For each Server log you configured you can hit Delete to remove this syslog server 

from logging system events for the switch.

Apply

Click Apply to save your changes to the switch.