Böwe Bell+Howell 1200 User Manual

 

 

 

Scanner Status and Error Code 

Displays the status of the connected scanner and the error code according to the condition of the scanner. 
Refer to the Troubleshooting section for 

Error Code and Status Message

 details page 56. 

 

Scanner Information  

Displays the following information

.  

•  Product ID  

•  Firmware version  

• Interface 

STI USB (HS) = USB 2.0 Hi-Speed   (default configuration) 
STI USB (FS) = USB 1.1 Full Speed  
ASPI SCSI = SCSI (invalid configuration. No ASPI driver included.) 
STI SCSI = SCSI (using installed scanner driver.) 

•  Terminator condition (only with SCSI Interface)  

•  Imprinter condition (only pertains to Model 1400uU)  
 
 

Sleep Mode button  

Opens the [Sleep Mode] dialog box. Refer to the Sleep Mode Dialog section for more information

. 

 

Clean Imprinter button  

If the ink-jet is stopped up, please use this button to clean the imprinter. This button is enabled only when the 
imprinter is attached. 

Scanner Counters 

Displays scanner counters.  The scanner has three counters. Here are their descriptions: 

System  

Displays the total number of documents scanned. 

 
After Clean Roller 

Displays how many documents have been scanned since the last time the rollers have been cleaned. 

 indicates how many documents can be scanned between the times the rollers need to be 

cleaned. When the After Clean Roller count is greater than Warning count, rollers need to be cleaned.  

After Replace Roller 

 

Displays how many documents have been scanned since the last time the rollers were replaced.  

 indicates how many documents can be scanned between the time the rollers need to be 

replaced and the time the rollers were last replaced.  When the After Replace Roller count is greater 
than the Warning count, the rollers need to be replaced.  

Update All Counter button  

Updates the scanner counters. Click this button to display the latest counts. 
 

Clear Counter button

  

There are two Clear Counter buttons. One clears the After Clean Roller counter, the other clears the After 
Replace Roller

 counter. 

 

• Click 

 button for After Clean Roller when cleaning the rollers. 

• Click 

 button for After Replace Roller when replacing the rollers.