Land Pride Car Video System 4220ST Leaflet

Page of 2
1
© Copyright 2005
Printed
Before You Start
Your Head Rest With Mounting Post is exclusively
designed for the Heavy Duty 4-Post Accessory Bar.
Please read these installation instructions and your
Treker Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
A separate Parts Manual for replacement parts can be
purchased from your dealer or available free of charge at
www.landpride.com. Have model and serial numbers
handy when placing an order.
Manual Part Numbers:
• Operator’s Manual (4220/4420 ST) . . . . 700-504M
• Parts Manual (4220/4420 ST) . . . . . . . . 700-504P
Further Assistance
Your dealer wants you to be satisfied with your new
Treker. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1.
Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
General Information
These assembly instructions apply to the following Back
Screen and Head Rest accessories listed below:
701-169A
HEAD REST WITH MOUNTING POST KIT
Tools required:
Safety Glasses
Work Gloves
Two 7/16" box end or open end wrenches
Two 1/2" box end or open end wrenches
Assembly Instructions
A detailed listing of parts for this accessory kit is
provided on page 2. Use the list as a checklist to
inventory parts received. Please contact your local Land
Pride dealer for any missing hardware.
Initial Preparations
Before servicing the vehicle the following procedure
must be met to secure the vehicle:
1.
Park vehicle on a level surface. Don’t work under or
around a vehicle parked on an incline
.
2.
Set shift selector in Park.
3.
Turn ignition switch off and remove switch key.
4.
Chock front and back of a wheel to prevent the
vehicle from rolling.
For 4220ST and 4420ST Trekers
Head Rest With Mounting Post
Assembly Instructions
12/05/06
Manual No. 701-170M