Intel Network Hardware 05-1662-005 User Manual

The following is an example of a configuration file.

########################################################################################

# Telephony Protocol :

#   For ANAPI(Analog Front End) use the root file name of the analog protocol file for

your country or telephone network)

#   For ICAPI (Digital Front End) use the root file name of the country dependent

parameter <.cdp> file

# IP Protocol :

#    The IP Protocol used for  opening the IP Line devices, values: H323, SIP, both

#

# DTMFmode

#

possible options:

#

OutOfBand, inband, rfc2833

#

#

# Capability for audio codecs:

#    g711Alaw

#    g711Mulaw

#    gsm

#    gsmEFR

#    g723_5_3k

#    g723_6_3k

#    g729a

#    g729ab

#

#  Capability for data codecs:

#    t38

#

#    Note: if you want to run the demo with coder g729 use:

#    g729a for running with VAD disable

#    and 729ab for running with VAD enable

#

# Caution:

#     If capability is g711Alaw /Mulaw  ==> FramesPerPkt = 10,20,30.

#                                           G711 frame per packet defines the packet

size in milliseconds

#     If capability is g723_5_3k / 6_3k ==> FramesPerPkt = 1, 2, 3 .

#                                           FrameSize isn't needed, default= 30ms.

#     If capability is gsm              ==> FramesPerPkt = 1, 2, 3 .

#                                           FrameSize isn't needed, default= 20ms.

#     If capability is gsmEFR           ==> FramesPerPkt = 1, 2, 3 .

#                                           FrameSize isn't needed, default= 20ms.

#     If capability is g729a            ==> FramesPerPkt = 3, 4 .

#                                           FrameSize isn't needed, default= 10ms.

#                                           VAD disable, the VAD parameter is ignored

#     If capability is g729ab            ==>FramesPerPkt = 3, 4 .

#                                           FrameSize isn't needed, default= 10ms.

#                                           VAD enable, the VAD parameter is ignored

#

########################################################################################

ipProtocol = H323

Channel = 1-120

{

   Source = NAME:Intel Corp.

   Destination = 0.0.0.0

   RemotePhoneNumber = 23

   LocalPhoneNumber = 26

   pstnProtocol = isdn