Insignia NS-CNV43 GPS Leaflet

Actual product may vary from image shown.

Charging the battery
Your GPS comes with a built-in rechargeable battery.  
Fully charge the battery before using the GPS for the first 
time. Charging time is normally about three hours. A 
fully charged battery delivers about two hours of use. 
See “Connecting power to your GPS” below.

Congratulations on your purchase of a high-quality 
Insignia product. Your GPS is designed for reliable and 
trouble-free performance. Use this guide for initial setup. 
See your User Guide for more information.

• 4.3" GPS
• Car DC power adapter
• USB cable
• Mounting bracket
• Mounting cradle

WARNING: The assembly must not be mounted so that it impairs the driver’s view of the road.
Make sure that your car’s airbags are not obstructed by the GPS.

Use the supplied mounting bracket and cradle to mount your GPS in a vehicle.
1  Slide the mounting cradle onto the end of the mounting bracket to secure it.
2  Set the bottom edge of the GPS onto the mounting cradle. Then push the retaining 
  bracket at the top of the mounting cradle (1) toward the GPS unit. To remove the 
  unit, push the retaining bracket at the top of the mount cradle toward the back of 
 the 

GPS.

3  Lift the suction cup lever, then press the suction cup to the windshield. Press down 
  on the suction cup lever (2) to secure the bracket to the windshield.
4  Rotate the mounted GPS (3) to a comfortable viewing position.

CAUTION: Disconnect the GPS from the DC power adapter when 
starting the vehicle.

•  Plug the USB connector on the DC power adapter into the USB 
  port on the side of the GPS, then plug the DC plug into the 
  vehicle’s 12-24V DC accessory socket (cigarette lighter socket).

• Micro SD memory card
• SIM card
• User Guide
• Quick Setup Guide