Asko T754 Product Datasheet
PLanning & Design: FAMILy-SIzE DRyER – LINE SERIES
™
T794FI, T784, T754 Vented Dryers
Specifications are subject to change without notice.
See installation instructions for additional details.
See installation instructions for additional details.
The door hinges on ASKO dryers
are shipped left-hinged, but they are
reversible. See the ASKO Dryer Use
and Care Guide for more information.
When placing the dryer next to a
wall or cabinet, be sure to leave ¼˝
(6 mm) of space between the dryer
and the wall or cabinet.
See page 35-36 for stacked
washer/dryer dimensions.
See pages 38-40 for cutout dimensions
for closet and under-cabinet
installations.
are shipped left-hinged, but they are
reversible. See the ASKO Dryer Use
and Care Guide for more information.
When placing the dryer next to a
wall or cabinet, be sure to leave ¼˝
(6 mm) of space between the dryer
and the wall or cabinet.
See page 35-36 for stacked
washer/dryer dimensions.
See pages 38-40 for cutout dimensions
for closet and under-cabinet
installations.
nOTe
: Power cord not supplied
with unit.
Venting requirements
WARNING! To reduce the risk of
fire, vented dryers must be exhausted
OUTDOORS or the equivalent.
Never cover the end of the dryer stub
or vent hose with anything to catch lint,
except for a UL-approved vent basket.
The exhaust hose should be run with
as few bends as possible to the point
of discharge. Maximum duct length
of 60´ (1829 cm) is allowed. Make
any bends as gentle as possible. A
maximum of four 90° bends may
be fitted in the hose, otherwise the
performance of the dryer will be
impeded. Subtract 4´ (122 cm) of
duct for each 90° elbow. If more
than 20' (210 cm) of duct is needed,
we recommend increasing the
diameter of the duct to 6˝ or 8˝
(152 mm or 203 mm).
fire, vented dryers must be exhausted
OUTDOORS or the equivalent.
Never cover the end of the dryer stub
or vent hose with anything to catch lint,
except for a UL-approved vent basket.
The exhaust hose should be run with
as few bends as possible to the point
of discharge. Maximum duct length
of 60´ (1829 cm) is allowed. Make
any bends as gentle as possible. A
maximum of four 90° bends may
be fitted in the hose, otherwise the
performance of the dryer will be
impeded. Subtract 4´ (122 cm) of
duct for each 90° elbow. If more
than 20' (210 cm) of duct is needed,
we recommend increasing the
diameter of the duct to 6˝ or 8˝
(152 mm or 203 mm).
If the exhaust hose is taken to a
wall outlet, a ventilation grill should
be fitted to prevent reverse flow of
cold air. Fit the ventilation grill to the
outside or inside of the wall.
This appliance should not be
exhausted into a chimney, a wall,
a ceiling, or a concealed space of a
building. Only a metal ventilation grill
should be used.
wall outlet, a ventilation grill should
be fitted to prevent reverse flow of
cold air. Fit the ventilation grill to the
outside or inside of the wall.
This appliance should not be
exhausted into a chimney, a wall,
a ceiling, or a concealed space of a
building. Only a metal ventilation grill
should be used.
46-1/8"; 1172 mm
4-1/8"
105 mm
4-3/4", 121 mm
5-1/2"
140 mm
(FI Model) 23-1/8"; 587 mm
23-7/8"; 606 mm
(FI Model) 47-7/8"; 1216 mm
23-1/2"
597 mm
Unit Dimensions
US
METRIC
HEIgHT:
33 ½˝– 34 ½˝
851 – 876 mm
WIDTH:
23 ½˝
597 mm
DEPTH:
T753
23
7
/
8
˝
*
606 mm
T793FI
23
1
/
8
˝
**
587 mm
T783
23
7
/
8
˝
*
606 mm
DEPTH WITH T753
46
1
/
8
˝
1172 mm
DOOR OPEN: T793FI
47
7
/
8
˝
1216 mm
T783
46
1
/
8
˝
1172 mm
WEIgHT:
86 lbs
39 kg
*
Includes control knob.
**
Does not include accessory door panel.
Technical Data
Supply voltage
Single-phase
220 V, 60 Hz
Max Wattage
3000 W
nOTe
: When on a separate outlet,
use 220 V, 20 Amp single-phase circuit.
When an ASKO wash er is connected,
use 220 V, 30 Amp sin gle-phase circuit.
When an ASKO wash er is connected,
use 220 V, 30 Amp sin gle-phase circuit.
installation
examples
examples
Subtract 4 feet
(122 cm) for
every 90° elbow.
(122 cm) for
every 90° elbow.
33