Fire Magic E790S4L1N71W Instruction Manual

REV 0 - 1009131447

L-C2-348

1

Retain for future reference.

This digital thermometer is for replacement on an Echelon 
Diamond grill. To install, follow the steps below:

1.  Be sure the grill is completely cool and the power to the 

grill is off.

2.  Locate the old thermometer on the grill control panel 

between the knobs. Remove it from the grill by slightly 
sliding it to the left, then lifting the right side outward 
until it clears the control panel.

CAUTION:  Remove carefully as the wire harnesses will still 

be attached to the back of the thermometer.

3.  The wire harnesses will be taped together. CAREFULLY 

cut the tape.

Important:  Take note of the way the harnesses are taped, 

as once the new thermometer is connected; 
the new harnesses will need to be similarly 
taped.

4.  CAREFULLY pull apart the 3 wire harnesses at the 

connectors, as shown in Fig. 1-1.

5.  Connect the new thermometer wire harnesses to the 

exposed wire harnesses coming out of the grill (see 
Fig. 1-1).

CAUTION:  The wire har nesses must be proper ly 

connected. All 3 wire harnesses have differently 
sized or shaped connectors to ensure a proper 
install.

6.  Ensure that all the wire harnesses are properly taped 

using high temperature electrical tape.

7.  Carefully install the thermometer into the cutout on the 

control panel.

Fig. 1-1 Removing / connecting 

digital thermometer

Thermometer cutout

Digital

thermometer

Wire

connections

Grill

control panel