Fisher & Paykel CMOTTKFP Installation Instruction

1.

Insert the rear section of the duct into the forward section of the duct and install 4 screws supplied

(Fig. 01). 

2.

Install foam tape on 2 flanges of the rear section of the duct (Fig. 02). 

3.

Remove and retain the 2 top screws, left and right, located at the rear vertical edges of the Microwave
(Fig. 03). 

4.

Place the duct on top of the Microwave and reinsert the 2 screws removed in Step 3 (Fig. 04).

■

Remove packaging

Trim Assembly

1

Base

1

Rear  Duct

1

Forward Duct

1

Foam Tape

2 ft

Mounting Bracket (L/R)

2

Sheet Metal Screws

14

1/8” Drill

#2 Phillip Screwdriver

Fig. 01

Fig. 02

Fig. 03

Fig. 04

4 Screws

Foam Tape

Foam
Tape